twitter facebook vintage audio king
mininain12 micromain27gen2 micromain35gen2
MiniMain12

MicroMain27 Gen2

MicroMain35 Gen2

The MicroMain27 is a groundbreaking monitor in a class all its own. It has attained nearly legendary status among top recording engineers and producers around the world. The speaker is designed to truly address the demands of the modern recording environment. It breaks down the traditional barriers between nearfield, main and mastering monitors. No need to have multiple pairs of speakers crowding your studio; no need to guess what the mastering engineer is going to hear. The MM27 is compact, powerful and uncompromising in every way - truly a nearfield on steroids!™ While exceptionally neutral and designed for ultra precision monitoring, the MicroMain27 is still very capable of rocking the house. It transforms the definition of a main monitor. MicroMain - the only monitor you may ever need.


1" soft dome tweeter, dual 5" midbass drivers and dual 10" subs housed in compact sealed enclosures yield high linearity and outstanding impulse response.

With 500 Watts of power in the subwoofer channel alone, the dual 10" drivers cross over seamlessly from the midbass, reaching down to 30Hz and rolling off at 1/4 the rate of ported designs to reveal much more deep bass information.

Since the sub motor structures are locked together the opposing forces cancel out and the cabinet remains rock steady even at very high output levels. There is no need for bass management in 5.1 systems because the MicroMain27 is truly a full-range monitor. The speaker can be placed either vertically or horizontally using the included pedestal.





Description: 3-way active monitor with integral subs
Controls: Input level attenuator, Twt/Mid/Sub amplifier mutes, crossover voicing select
Input Impedance: 50k Ohm
Frequency Response:
30Hz - 30kHz (±3dB),
34Hz - 20kHz (±1.5dB)
Bass Response: -3 dB @ 30Hz, Q = 0.707
Slope = 12 dB/octave
Cabinet: 32 liters total internal volume, Sealed sub enclosure, Individual sealed midbass enclosures, Machined aluminum front baffle plate
Crossover Frequencies:
100/2500 Hz
Tweeter: 1" soft dome, Rear waveguide chamber
Power: 60 W
Dual Midbasses: 5" poly cones, Sealed rear waveguide enclosures
Power: 250 W
Dual Subwoofers: 10" aluminum cones, 1" peak-to-peak linear excursion
Power: 500 W
AC Power Input: Nominal 115 VAC or 230 VAC selectable
Power Consumption:
Idle: 30W, Maximum: 675W
Weight: Speaker: 71 lbs each (32 kg)
Shipping: 79 lbs each (36 kg)
Dimensions HxWxD:
20.5 x 9.5 x 15.25 inches (521 x 241 x 387 mm)